TPS2HB16AQPWPRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13.5V |
| Base Part Number | TPS2HB16 |
| JESD-30 Code | R-PDSO-G16 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 18V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 60A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3V~28V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Turn On Time | 145 µs |
| Output Peak Current Limit-Nom | 29.1A |
| Rds On (Typ) | 16m Ω |
| Turn Off Time | 147 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| RoHS Status | ROHS3 Compliant |
TPS2HB16AQPWPRQ1 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).Package 16-PowerTSSOP (0.173, 4.40mm Width) contains it.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~125°C TA for reliable operation.By default, it is set to output 2.The LED driving board operates at Not Required volts.The maximum output voltage of this LED driver is N-Channel volts.It is a member of the TPS2HB16 family.It has a total of 16 terminations.It contains 2 functions.Its maximum output voltage is 60AV.High efficiency is possible when the supply voltage is set to 13.5V.This electrical component is included in the Automotive, AEC-Q100 series.The Vsup value (maximum supply voltage) is set to 18V.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 6V.
TPS2HB16AQPWPRQ1 Features
Supplied from 13.5V
TPS2HB16AQPWPRQ1 Applications
There are a lot of Texas Instruments TPS2HB16AQPWPRQ1 Power Switches ICs applications.
- Telecom and Network Systems
- Hot Swap
- USB Power Distribution
- Hot-Swap Systems
- USB Power Distribution
- Portable Video Game Players
- Wearable Devices
- Wireless Modem Data Cards
- USB Ports/Hubs
- PC Cards