TPS2553DRVR-1
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 9.695537mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2553 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 100m Ω |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2553DRVR-1 Overview
It is package in Tape & Reel (TR) case.This file is included in package 6-WDFN Exposed Pad.The LED driver is mounted as Surface Mount.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.By default, it is set to output 1.With a supply voltage of Not Required, the LED driving board operates.Voltage output is N-Channel volts at maximum.It has a total of Slew Rate Controlled, Status Flag features.The TPS2553 family consists of this type.It consists of 6 terminations in total.6 pins are used for operation.Currently, the lighting driver has a total of 1 functions.In order to meet the operation criteria, the maximum output current drops to 1.5A.Using a voltage of 5V allows for high efficiency.6 pins are connected to it in total.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.There are a total of 1 channels available.This LED driver can handle voltages up to 6.5V volts.As far as input voltage goes, it has a minimum of 2.5V volts.
TPS2553DRVR-1 Features
Supplied from 5V
1 channels
TPS2553DRVR-1 Applications
There are a lot of Texas Instruments TPS2553DRVR-1 Power Switches ICs applications.
- PC Cards
- Hot-Swap Systems
- HDD and SSD
- Storage (HDDs, SSDs)
- Hard Disk Drives
- Portable/Handheld Devices
- Wearable Devices
- Portable Music Players
- Storage Drives
- USB Power Distribution