TPS2551QDBVRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 625mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS2551 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1.1A |
| Output Configuration | High Side |
| Power Dissipation | 625mW |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 6.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 85m Ω |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2551QDBVRQ1 Overview
The LED driver's packaged as a Tape & Reel (TR).This file is included in package SOT-23-6.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the type of switch owned by it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has 1 outputs.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage is N-Channel volts.A lighting driver with Slew Rate Controlled features is available.There is a TPS2551 family of things that it belongs to.As a result, there are 6 terminations.For operation, we use the 6 pins.It consists of 1 functions.In terms of output, the lighting driver can provide a maximum of 1.1A V.The supply voltage can be 5V for high efficiency.In total, it has 6 pins.85mOhm is the resistance of the lighting driver.There is an electrical component included in the Automotive, AEC-Q100 series.The output current is set to 0A in this case.Normal operation requires a voltage above 2.5V for the supply voltage.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.The maximum input voltage is 5.5V volts.As far as input voltage goes, it has a minimum of 4.5V volts.
TPS2551QDBVRQ1 Features
Supplied from 5V
Resistance of 85mOhm
1 channels
TPS2551QDBVRQ1 Applications
There are a lot of Texas Instruments TPS2551QDBVRQ1 Power Switches ICs applications.
- USB Protection
- Mobile Communication Devices
- Hot Swaps
- PC Card Hot Swap
- Portable GPS
- Wireless Modem Data Cards
- HDD and SSD
- Solid State Drivers
- Portable GPS Device
- Set-Top Boxes