TPS2376DDA-HG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 70.590313mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Controller (PD) |
| Resistance | 1Ohm |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 0V~57V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Base Part Number | TPS2376 |
| Pin Count | 8 |
| Number of Outputs | 5 |
| Output Voltage | 100V |
| Operating Supply Voltage | 57V |
| Number of Channels | 1 |
| Operating Supply Current | 240μA |
| Nominal Supply Current | 240μA |
| Power Dissipation | 266mW |
| Output Current | 350mA |
| Adjustable Threshold | YES |
| Output Power | 12.95W |
| Supply Current-Max (Isup) | 0.6mA |
| Nominal Input Voltage | 57V |
| Internal Switch(s) | Yes |
| Min Current Limit | 625mA |
| Standards | 802.3af (PoE) |
| Auxiliary Sense | No |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2376DDA-HG4 Overview
As part of the Tube package, PoE controller is embedded.It is packaged in the way of 8-PowerSOIC (0.154, 3.90mm Width).PoE controller is a Controller (PD) type electronic part.The number of channels is growing strong/weak: 1.Ensure the reliability of the PoE by operating it at -40°C~85°C.A 0V~57V voltage is used to supply power to this electrical Po E controller.It is possible to find the Po E controllers of the base part number by using the base part number TPS2376.8 termination is achieved by terminating a transmission line with an impedance match power over ethernet controller.Count of 8 pins is included.A Po E controller like this is included in Power Management Circuits.There is a 8 pin design on this board.There is a 260 thermal peak of this electrical ethernet power controller (Cel).48V should be greater than the supply voltage.Upon reaching 0.6mA, Isup reaches its maximal current.For 240μA to perform fully, a supply current must be provided.With its maximum design flexibility, 350mA boasts one of the highest output currents on the market.This PoE controller requires a supply voltage of 57V to function properly.1Ohm (*) represents the PoE controller's resistance.A 12.95W watt power output is achieved by this ethernet over power controller.An power over ethernet controller such as this one produces a voltage of 100V as its output voltage.
TPS2376DDA-HG4 Features
Tube package
8 pin count
8 pins
The output current of 350mA
1Ohm (Ω)
TPS2376DDA-HG4 Applications
There are a lot of Texas Instruments TPS2376DDA-HG4 Power Over Ethernet (PoE) Controllers applications.
- Security Cameras
- High Power Wireless Data Systems
- Public Information Displays
- IEEE 802.3bt (Draft) Compliant Devices
- Dual Signature PD/Forced UPOE
- Multiband access points
- POS Terminals
- Commercial Information Displays
- Lighting
- Pico-base Stations