TPS22960RSER
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFQFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Max Power Dissipation | 862.1mW |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22960 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Quiescent Current | 350nA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.62V~5.5V |
| Rds On (Typ) | 342m Ω |
| Height | 600μm |
| Length | 1.5mm |
| Width | 1.5mm |
| Thickness | 550μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22960RSER Overview
Tape & Reel (TR) is how it's packaged.It is included with the 8-UFQFN package as well.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of P-Channel volts.A lighting driver with Load Discharge, Slew Rate Controlled features is available.It is part of the TPS22960 family of LED drivers.The termination count is 8.In order to operate, 8 pins are used.The LED driver has 1 functions.Maximum output current falls to 500mA when operation criteria are met.As long as the supply voltage is 3.3V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.It is equipped with a total of 8 pins.This results in a 500mA output current.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).There are a total of 2 channels to choose from.Electrical components classified as General Purpose belong to this category.
TPS22960RSER Features
Supplied from 3.3V
2 channels
TPS22960RSER Applications
There are a lot of Texas Instruments TPS22960RSER Power Switches ICs applications.
- Wireless Headsets
- USB3.1 Power Delivery
- Low Voltage I/O System Power
- Portable GPS Device
- Handheld Devices
- Portable/Handheld Devices
- Solid State Drivers
- Hot Swaps
- Wireless/Networking Cards
- USB Protection