TPS22945DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 1.2Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS22945 |
| Pin Count | 5 |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Nominal Supply Current | 1μA |
| Output Configuration | High Side |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 40μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.62V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.62V~5.5V |
| Min Current Limit | 100mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 400m Ω |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22945DCKR Overview
It is packaged in the manner of a Tape & Reel (TR).The 5-TSSOP, SC-70-5, SOT-353 package contains it.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts has been specified.It is equipped with Auto Restart features.It belongs to the family TPS22945.It has a total of 5 terminations.5 pins are used for operation.The LED driver has 1 functions.Supply voltages of 1.8V allow for high efficiency.A total of 5 pins are present on it.Currently, the LED driving board has a resistance of 1.2Ohm ohms.When this case is used, the output current is set to 200mA.You can select from 1 channels.The supply voltage should be set at 5.5V for best efficiency.This LED driving board can accept voltages up to 5.5V volts as an input.There is a minimum input voltage of 1.62V volts.The maximum current required for its operation is 40μA.The lighting driver is equipped with 1 inputs.For this electrical component, General Purpose is the classification.
TPS22945DCKR Features
Supplied from 1.8V
Resistance of 1.2Ohm
1 channels
TPS22945DCKR Applications
There are a lot of Texas Instruments TPS22945DCKR Power Switches ICs applications.
- Portable GPS Device
- Hot Swap
- Handheld Devices
- Set-top-box
- Low Voltage I/O System Power
- Smartphone and PDA
- USB3.1 Power Delivery
- Notebook and Tablet Computers
- Portable Devices
- USB Protection