TPS22944DCKR
| Parameters | |
|---|---|
| Current | 20mA |
| Output Configuration | High Side |
| Power Dissipation | 122mW |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 80μA |
| Adjustable Threshold | NO |
| Quiescent Current | 40μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.62V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.62V~5.5V |
| Min Current Limit | 100mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 400m Ω |
| Drain to Source Resistance | 400mOhm |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 500mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Power Rating | 122mW |
| Max Power Dissipation | 122mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS22944 |
| Pin Count | 5 |
| Output Type | P-Channel |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 1μA |
TPS22944DCKR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).In the 5-TSSOP, SC-70-5, SOT-353 package, it is included.The lighting driver has the mounting type Surface Mount.There is a switch type of General Purpose.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.Operation is based on Not Required supply voltage.It has a maximum output voltage of P-Channel volts.It is part of the TPS22944 family of LED drivers.The termination count is 5.The 5 pins are used for the operation of the system.Currently, the lighting driver has a total of 1 functions.Using a voltage of 1.8V allows for high efficiency.The LED driving board is equipped with a total of 5 pins.In this case, there is 500mOhm resistance in the LED driving board.This results in a 200mA output current.There are a total of 1 channels available.A maximum input voltage of 5.5V volts can be applied to it.It has a 1.62V volt minimum input voltage.A maximum current requirement of 80μA is required for its operation.It has 1 inputs.Electrical components classified as General Purpose belong to this category.
TPS22944DCKR Features
Supplied from 1.8V
Resistance of 500mOhm
1 channels
TPS22944DCKR Applications
There are a lot of Texas Instruments TPS22944DCKR Power Switches ICs applications.
- Smart Phones, Feature Phones
- Smartphone and PDA
- Hot Swaps
- Portable Music Players
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- Hot-Swap Systems
- Hard Disk Drives
- Portable Video Game Players
- PDAs