TPS22941DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 500mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Power Rating | 122mW |
| Max Power Dissipation | 122mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS22941 |
| Pin Count | 5 |
| Output Type | P-Channel |
| Max Output Current | 40mA |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 1μA |
| Current | 20mA |
| Output Configuration | High Side |
| Power Dissipation | 122mW |
| Output Current | 80mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 80μA |
| Adjustable Threshold | NO |
| Quiescent Current | 40μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.62V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.62V~5.5V |
| Min Current Limit | 40mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 400m Ω |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22941DCKR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a package for it in the 5-TSSOP, SC-70-5, SOT-353 package.Mounting type Surface Mount is selected for the LED driving board.It owns General Purpose switch type.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.To operate, it needs a supply voltage of Not Required.A maximum output voltage of P-Channel volts can be obtained with this LED driver.It is equipped with Auto Restart features.It belongs to the family TPS22941.It consists of 5 terminations in total.For operation, 5 pins are used.It contains 1 functions.As a result, the maximum output current is reduced to 40mA in order to meet the operation requirements.High efficiency is possible at 1.8V supply voltage.It is equipped with a total of 5 pins.The LED driver has 500mOhm resistance.The output current is set to 80mA in this case.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.In total, 1 channels are available.Its maximum input voltage is 5.5V volts.Input voltage must be at least 1.62V volts.This system has a maximum current requirement of 80μA.We have available 1 inputs.
TPS22941DCKR Features
Supplied from 1.8V
Resistance of 500mOhm
1 channels
TPS22941DCKR Applications
There are a lot of Texas Instruments TPS22941DCKR Power Switches ICs applications.
- USB Power Distribution
- Wearable Devices
- Smart Phones, Feature Phones
- Hot Swap
- Hot-Swap Systems
- PC Card Hot Swap
- Storage Drives
- Notebook and Tablet Computers
- USB Ports/Hubs
- Hot Swap