TPS22924BYZT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 810.63mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS22924 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Operating Supply Voltage | 3.6V |
| Supply Voltage-Min (Vsup) | 0.75V |
| Number of Channels | 1 |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 810.63mW |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Quiescent Current | 75μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 750mV |
| Max Input Voltage | 3.6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.75V~3.6V |
| Rds On (Typ) | 18.3m Ω |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22924BYZT Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It's included in the 6-XFBGA, DSBGA package.Surface Mount is the mounting type of the LED driver.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.The lighting driver is equipped with 1 outputs that can be used.The LED driving board is powered by a voltage of Not Required.It has a maximum output voltage of N-Channel volts.A lighting driver with Load Discharge, Slew Rate Controlled features is available.As you can see, it comes from the TPS22924 family.There are 6 terminations in it.6 pins are used for operation.As far as the lighting driver is concerned, there are 1 functions.The supply voltage can be 3.3V for high efficiency.In this case, it is mounted in the way of Surface Mount.A total of 6 pins are included in this LED driver.In this case, the output current is set to 2A.For normal operation, the supply voltage (Vsup) must be kept above 0.75V.We currently have 1 channels available.A supply voltage of 3.6V is recommended for maximum efficiency.A maximum input voltage of 3.6V volts can be applied to it.There is a minimum input voltage of 750mV volts.This electrical component is classified as General Purpose.
TPS22924BYZT Features
Supplied from 3.3V
1 channels
TPS22924BYZT Applications
There are a lot of Texas Instruments TPS22924BYZT Power Switches ICs applications.
- USB Ports/Hubs
- Portable GPS Device
- Hot-Swap Systems
- USB3.1 Power Delivery
- USB Power Distribution
- Hot Swap
- Portable Music Players
- USB Power Distribution
- Hot Swap
- Notebook PC