TPS2115ADRBTG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.012046mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2115 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Current - Output (Max) | 2A |
| Output Current | 1.25A |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Current - Supply | 55μA |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 1.25A |
| Delay Time - OFF | 5ms |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2115ADRBTG4 Overview
The case is made of 8-VDFN Exposed Pad plastic. A Tape & Reel (TR) case is a good choice for packing the part. There are two ways in which this part is mounted. There is a voltage of 2.8V~5.5V applied to it. There must not be a minimum operating temperature of -40°C~85°C for this component. It is suitable for the component connected in Handheld/Mobile Devices. A Source Selector Switch device is categorized as such. A type of FET known as N-Channel is a type of FET that can be recognized by its symbol, which can be found on the package. A 8 termination is available on the part. Pins are attached to it using 8 pins. Using TPS2115 as a basis, the part is constructed. Powered by 2.8V, it delivers high performance. In order to run 260, a part's peak reflow temperature is utilized. Run the supply current of the part at 55μA. There is a part of the Power Management Circuits family that is used in this part. There are 8 pins in the part. It should be possible to conduct the supply current (Isup) under 0.09mA. In this case, 1 outputs are available. Under 2A, the output current can conduct through the chip. This chip can be used with an input voltage of more than 5.5V volts without any problems. It is possible to use this chip with an input voltage below 2.8V volts. The part can be delivered under 1.25A output current. The component can be delivered a current of 1.25A as an output. It is possible for this device to operate at a voltage of 5.5V. Runs on 2 inputs.
TPS2115ADRBTG4 Features
in a 8-VDFN Exposed Pad case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2115ADRBTG4 Applications
There are a lot of Texas Instruments TPS2115ADRBTG4 Ideal Diode controller applications.
- Power Tools
- Asset tracker
- MP3 Players
- Automotive infotainment systems - head unit,telematics control unit
- Automotive battery protection
- Digital Radios
- Automotive USB hubs
- Electricity meters
- AC Rectifier
- Reverse Polarity Protection