TPS2114APWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 120mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 387mW |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2114 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Output Current | 750mA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 500 μs |
| Current - Supply | 55μA |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 750mA |
| Delay Time - OFF | 3ms |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2114APWR Overview
A 8-TSSOP (0.173, 4.40mm Width) case is included. It is suited to pack the part in Tape & Reel (TR) case. There is a Surface Mount-axis mounted on the part. It is given a voltage of 2.8V~5.5V. It is not allowed for this component to operate below -40°C~85°C degrees. It is designed to fit the component that is connected in Handheld/Mobile Devices position. Source Selector Switch is the category for the device. In the case of FETs, N-Channel is recognized as the type. The part is available with 8 terminations as an option. 8 pins are used in the design. Based on TPS2114, this part is manufactured. 2.8V provides its performance. In order to run 260, a part's peak reflow temperature is utilized. Run the supply current of the part at 55μA. As far as I know, the part belongs to the Power Management Circuits family. Among the pins on the part are 8 pins. It should be possible to conduct the supply current (Isup) under 0.09mA. In this case, 1 outputs are available. An input voltage of more than 5.5V V can be used with the chip. A voltage less than 2.8VV can be used to drive the chip. In terms of output current, the part can be delivered under 750mA output current. As a result, 750mA is the maximum output current that can be delivered to the component. In order for this device to function, it requires a supply voltage of 5.5V. For this part to run, 2 inputs are required. This device's maximum output voltage is 6V. Keeping the device resistance within 120mOhm is recommended.
TPS2114APWR Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2114APWR Applications
There are a lot of Texas Instruments TPS2114APWR Ideal Diode controller applications.
- Electricity meters
- Digital Radios
- Automotive ADAS systems - camera
- Motor drives
- AC Rectifier
- Building automation
- Camera ECU
- Active ORing for redundant power
- Asset tracker
- Electronic point of sale