TPS2111PWRG4
| Parameters | |
|---|---|
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 55μA |
| Current - Output | 1.25A |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Min Input Voltage | 2.8V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 5 ms |
| Current - Output 2 | 1.25A |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS2111PWRG4 Overview
There is a TSSOP case that comes with it. In Tape & Reel (TR) cases, it is convenient to pack the part. In this part, there are 8 terminations. There are 8 pins on the board and it is designed with them. Performance is delivered by 2.8V. In order to run 260, a part's peak reflow temperature is utilized. The part is from Power Management Circuits family. This part contains 8 pins that are located on the surface. In order for it to operate, it uses a supply current called 55μA. In order to conduct under 0.09mA, the supply current (Isup) should be conducted. In this case, 1 outputs are available. Using the chip over 5.5V volts is allowed. A voltage less than 2.8VV can be used to drive the chip. Under 1.25A output current, the part can be delivered. With a supply voltage of 5.5V, this device can operate. For this part to run, 2 inputs are required. As soon as the temperature rises above -40°C, the part should be used. In the case of lower temperatures than 85°C, the part should be used.
TPS2111PWRG4 Features
in a TSSOP case
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2111PWRG4 Applications
There are a lot of Texas Instruments TPS2111PWRG4 Ideal Diode controller applications.
- Head Unit
- AC Rectifier
- Electricity meters
- Power Tools
- Industrial transport
- PDAs
- Industrial motor drives
- Electronic point of sale
- Automotive battery protection
- MP3 Players