TPS2091DR
| Parameters | |
|---|---|
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2091 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 250mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Quiescent Current | 85μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 80m Ω |
TPS2091DR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).Package 8-SOIC (0.154, 3.90mm Width) contains it.The LED driver is mounted as Surface Mount.It owns the General Purpose switch type.It is recommended that the temperature be set to 0°C~125°C TJ for reliable operation.The lighting driver is equipped with 2 outputs that can be used.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.This LED driving board is equipped with Status Flag features in order for it to be useful.It is part of the TPS2091 family of LED drivers.It contains 8 terminations.The operation is carried out using the 8 pins.The LED driving board has a total of 2 functions.To meet the operation criteria, the maximum output current drops to 250mA.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.It is positioned in the direction of Surface Mount.This LED driver is equipped with a total of 8 pins.When this case is used, the output current is set to 250mA.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.This part has a power supply of 3/5V volts.Optimal efficiency requires a voltage of 5.5V.There is a maximum input voltage of 5.5V volts.As a minimum input voltage, it requires 2.7V volts.
TPS2091DR Features
Supplied from 3.3V
TPS2091DR Applications
There are a lot of Texas Instruments TPS2091DR Power Switches ICs applications.
- Smart Phones, Feature Phones
- Wireless/Networking Cards
- USB Ports/Hubs
- Notebook PC
- PC Cards
- Mobile Communication Devices
- Set-Top Boxes
- Low Voltage I/O System Power
- HDD, SSD
- Hot Swap