TPS2090DR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2090 |
| Pin Count | 8 |
| Output Type | N-Channel |
| Max Output Current | 250mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Nominal Supply Current | 85μA |
| Output Configuration | High Side |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Quiescent Current | 85μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Min Current Limit | 300mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 80m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2090DR Overview
The LED driver's packaged as a Tape & Reel (TR).Package 8-SOIC (0.154, 3.90mm Width) contains it.The lighting driver has the mounting type Surface Mount.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to 0°C~125°C TJ.The LED driving board is powered by a voltage of Not Required.It has a maximum output voltage of N-Channel volts.This LED driving board is equipped with Status Flag features in order for it to be useful.The TPS2090 family consists of this type.A total of 8 terminations can be found in it.In order to operate, the 8 pins are used.There are 2 functions of the LED driver.The maximum output current must drop to 250mA to meet the operation criteria.As long as the supply voltage is 3.3V, high efficiency can be achieved.There are 8 pins in total on this board.Currently, the LED driving board has a resistance of 80mOhm ohms.In this case, the output current is set to 250mA.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In this case, the power supply is 3/5V.For maximum efficiency, the supply voltage should be set to 5.5V.There is a maximum input voltage of 5.5V volts.The minimum input voltage is 2.7V volts.It has a maximum current requirement of 85μA.There are 2 inputs available.
TPS2090DR Features
Supplied from 3.3V
Resistance of 80mOhm
TPS2090DR Applications
There are a lot of Texas Instruments TPS2090DR Power Switches ICs applications.
- Set-Top Boxes
- PDAs
- Hard Disk Drives
- Telecom and Network Systems
- Wireless/Networking Cards
- Mobile Communication Devices
- HDD, SSD
- Notebook and Tablet Computers
- Storage Drives
- Smartphone and PDA