TPS2081DG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2081 |
| Pin Count | 8 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Nominal Supply Current | 85μA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Quiescent Current | 85μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Min Current Limit | 700mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 80m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2081DG4 Overview
As a result, it is packaged in the form of a Tube.There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type that it owns.To ensure reliable performance, the temperature should be set to 0°C~125°C TJ.Operation is based on a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.As far as features are concerned, the LED driving board has Status Flag.The TPS2081 family contains this object.It contains 8 terminations.The operation is performed through the 8 pins.It has 2 functions.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.Supply voltages of 3.3V allow for high efficiency.The LED driving board is equipped with a total of 8 pins.It has 80mOhm resistance.This case has the output current set to 500mA.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.It has a power supply of 3/5V.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.It has a maximum input voltage of 5.5V volts.Input voltage must be at least 2.7V volts.A maximum current requirement of 85μA is required for its operation.A total of 2 inputs are available.
TPS2081DG4 Features
Supplied from 3.3V
Resistance of 80mOhm
TPS2081DG4 Applications
There are a lot of Texas Instruments TPS2081DG4 Power Switches ICs applications.
- Hard Disk Drives
- Notebook and Tablet Computers
- Various applications equipped with buttons
- Low Voltage I/O System Power
- Hot-Swap Systems
- Storage Drives
- USB Protection
- Portable Video Game Players
- Wearable Devices
- Portable GPS Device