TPS2065CDGN-2
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Resistance | 86mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2065 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.4 ms |
| Switch Type | USB Switch |
| Supply Current-Max (Isup) | 0.0002mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3.25 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Switching | MAKE-BEFORE-BREAK |
| Rds On (Typ) | 86m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 24.408939mg |
TPS2065CDGN-2 Overview
It is package in Tube case.There is a package for it in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.The mounting type of the LED driver is Surface Mount.It owns USB Switch switch type.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.There is a default setting of 1 for output.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.In terms of features, the LED driving board has Status Flag.It comes under the family of TPS2065.The 8 pins are used to operate the LED driver.This lighting driver is mounted in the way of Surface Mount.It has 86mOhm resistance.This case results in a 1A output current.The analog IC used in this lighting driver is SPST.Its maximum supply current for operation is 0.0002mA.
TPS2065CDGN-2 Features
Resistance of 86mOhm
TPS2065CDGN-2 Applications
There are a lot of Texas Instruments TPS2065CDGN-2 Power Switches ICs applications.
- Notebook and Tablet Computers
- USB3.1 Power Delivery
- Solid-State Drives
- Various applications equipped with buttons
- Smart Phones, Feature Phones
- Hard Disk Drives
- USB Power Distribution
- Storage (HDDs, SSDs)
- Telecom and Network Systems
- HDD, SSD