TPS2062DGNR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2062 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2062DGNR Overview
It is packaged in the manner of a Tape & Reel (TR).This file is included in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~125°C TJ.It is possible to use 2 outputs in the lighting driver.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts has been specified.Currently, the LED driving board is equipped with Status Flag features.As you can see, it comes from the TPS2062 family.A total of 8 terminations have been recorded.In order to operate, 8 pins are used.It is important to note that the LED driving board has 1 functions.The lighting driver's maximum output is 1AV.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.It is mounted in the way of Surface Mount.A total of 8 pins are included in this LED driver.The LED driver has 70mOhm resistance.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 1 channels available.As a result of using this lighting driver, UNDERVOLTAGE LOCKOUT can also be produced.Operation requires 0.09mA supply current.
TPS2062DGNR Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2062DGNR Applications
There are a lot of Texas Instruments TPS2062DGNR Power Switches ICs applications.
- Low Voltage I/O System Power
- Solid-State Drives
- PC Cards
- Hard Disk Drives
- Wireless Headsets
- Storage Drives
- Gaming
- Wireless Modem Data Cards
- Wearable Devices
- Portable Devices