TPS2062D-1G4
| Parameters | |
|---|---|
| Package / Case | D |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 50μA |
| Adjustable Threshold | NO |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TPS2062D-1G4 Overview
You get it with the D package.At the moment, 1 channels are accessible.The 8 terminations total to three.8 pins make up its total.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 3.3V.During operation, 8 pins are used.Hot-swappable device is stable to operate at a temperature of 85°C°C at the maximum.Hot-swappable device maintains Hot-swappable devices reliabilHot-swappable devicey at a minimum working temperature of -40°C degrees Celsius.An analog IC, POWER SUPPLY SUPPORT CIRCUIT in this instance, is used for this gadget.The default setting is output 2.Hot Swap can handle a maximum supply voltage of 5.5VV.If necessary, it can work with a low supply voltage, such as 4.5VV.70mOhm resistance is present in the device.
TPS2062D-1G4 Features
The terminal position of 8
TPS2062D-1G4 Applications
There are a lot of Texas Instruments TPS2062D-1G4 hot swap controllers applications.
- Active current limit
- Reverse current protection
- Thermal limitation
- Disconnect faulty loads before supply voltage drops
- Network switches
- Raid
- Overcurrent protection
- Power supply hotswap & inrush control
- Continuous monitoring of device temperature
- Distributed power systems