TPS2062D-1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 585.82mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2062 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Threshold Voltage | 2.4 |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2062D-1 Overview
Tube is how it's packaged.There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.As a default, the output is set to 2.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Load Discharge, Status Flag.It comes under the family of TPS2062.In total, there are 8 terminations.For operation, we use the 8 pins.The LED driving board has a total of 1 functions.Its maximum output voltage is 1AV.It is possible to obtain high efficiency with a supply voltage of 3.3V.This LED driver is equipped with a total of 8 pins.70mOhm resistance is present in the lighting driver.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.Input voltage is limited to 5.5V volts.It requires 2.7V volts as the minimum input voltage.
TPS2062D-1 Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
TPS2062D-1 Applications
There are a lot of Texas Instruments TPS2062D-1 Power Switches ICs applications.
- Hard Disk Drives
- Portable Music Players
- Portable GPS Device
- Storage Drives
- Low Voltage I/O System Power
- Hot Swap
- Wireless/Networking Cards
- USB3.1 Power Delivery
- Set-Top Boxes
- Notebook and Tablet Computers