TPS2060CDGN
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2060 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1.5A |
| Nominal Supply Current | 90μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2060CDGN Overview
It is package in Tube case.This file is included in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.This lighting drivere has a mounting type of Surface Mount.There is a General Purpose switch type associated with it.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.There are 2 outputs available on this lighting driver.Operation is based on Not Required supply voltage.The maximum output voltage is N-Channel volts.There are Load Discharge, Status Flag features available on the LED driving board.It belongs to the family TPS2060.It contains 8 terminations.The 8 pins are used for the operation of the system.It contains 1 functions.The LED driver output is limited to 1.5AV.The supply voltage can be 5V for high efficiency.It is equipped with a total of 8 pins.In this case, there is 70mOhm resistance in the LED driving board.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.There are a total of 2 channels to choose from.This LED driver can handle voltages up to 5.5V volts.Input voltage must be at least 4.5V volts.
TPS2060CDGN Features
Supplied from 5V
Resistance of 70mOhm
2 channels
TPS2060CDGN Applications
There are a lot of Texas Instruments TPS2060CDGN Power Switches ICs applications.
- Set-top-box
- USB Protection
- USB Ports/Hubs
- Portable GPS Device
- Solid State Drivers
- Wireless Headsets
- HDD, SSD
- Storage Drives
- Smart Phones, Feature Phones
- Wireless/Networking Cards