TPS2051AD
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2051 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2051AD Overview
A Tube is used to package it.It is included in the package 8-SOIC (0.154, 3.90mm Width).This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type that it owns.The temperature should be set to 0°C~125°C TJ to ensure reliable functioning.There is a default setting of 1 for output.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.It is equipped with Status Flag features.The TPS2051 family contains this object.The termination count is 8.The operation is performed through the 8 pins.Currently, the lighting driver has a total of 1 functions.Using a voltage of 3.3V allows for high efficiency.In this case, it is mounted in the way of Surface Mount.The LED driver has a total of 8 pins.The LED driver has 80mOhm resistance.Normal operation requires Vsup above 2.7V.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.There are a total of 1 channels available.
TPS2051AD Features
Supplied from 3.3V
Resistance of 80mOhm
1 channels
TPS2051AD Applications
There are a lot of Texas Instruments TPS2051AD Power Switches ICs applications.
- Storage Drives
- Solid-State Drives
- Hard Disk Drives
- Notebook and Tablet Computers
- USB Power Distribution
- Storage (HDDs, SSDs)
- Gaming
- Smart Phones, Feature Phones
- Wireless Headsets
- Hot Swap