TPS2044BD
| Parameters | |
|---|---|
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 898.47mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2044 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Number of Channels | 4 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 898mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Max Output Voltage | 6V |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2 x 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
TPS2044BD Overview
Tube is the way it's packaged.There is a package for it in the 16-SOIC (0.154, 3.90mm Width) package.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type that it owns.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The LED driver is equipped with 4 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It is equipped with Status Flag features.It comes under the family of TPS2044.As a result, there are 16 terminations.16 pins are used for operation.The LED driving board has a total of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 500mA.The supply voltage can be 3.3V for high efficiency.The LED driver has a total of 16 pins.The LED driver has 70mOhm resistance.This case results in a 500mA output current.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.A total of 4 channels are available for you to choose from.This LED driving board can accept voltages up to 5.5V volts as an input.It has a 2.7V volt minimum input voltage.With this LED driver, UNDERVOLTAGE LOCKOUT can also be produced.
TPS2044BD Features
Supplied from 3.3V
Resistance of 70mOhm
4 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2044BD Applications
There are a lot of Texas Instruments TPS2044BD Power Switches ICs applications.
- Solid-State Drives
- Portable/Handheld Devices
- Hot Swap
- Hot Swap
- Smartphone and PDA
- Set-Top Boxes
- Hard Disk Drives
- Storage (HDDs, SSDs)
- Hot Swaps
- Portable GPS