TPS2042BDRBT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2042 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2042BDRBT Overview
As a result, it is packaged in the form of a Tape & Reel (TR).Package 8-VDFN Exposed Pad contains it.In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.A maximum voltage of N-Channel volts is available from the output of this LED driver.Features of the lighting driver are Status Flag.It belongs to the family TPS2042.As a result, there are 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.The LED driving board has a total of 1 functions.500mAV is the maximum output of the LED driver.High efficiency is possible when the supply voltage is set to 3.3V.A total of 8 pins are included in this LED driver.In this case, there is 70mOhm resistance in the LED driving board.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.We offer 2 channels in total.This LED driver can handle voltages up to 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.As a result of using this lighting driver, UNDERVOLTAGE LOCKOUT can also be produced.0.09mA is the maximum operating current.
TPS2042BDRBT Features
Supplied from 3.3V
Resistance of 70mOhm
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2042BDRBT Applications
There are a lot of Texas Instruments TPS2042BDRBT Power Switches ICs applications.
- Portable Music Players
- Gaming
- Low Voltage I/O System Power
- Wireless Modem Data Cards
- Portable/Handheld Devices
- Wireless Headsets
- Wireless/Networking Cards
- Solid-State Drives
- Set-top-box
- PC Card Hot Swap