TPS2034P
| Parameters | |
|---|---|
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TPS2034 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Current - Output (Max) | 2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 3A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
TPS2034P Overview
It is packaged in the form of a Tube.It's included in the 8-DIP (0.300, 7.62mm) package.This lighting drivere has a mounting type of Through Hole.This switch is of type General Purpose.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.There are Status Flag features available on the LED driving board.It comes under the family of TPS2034.It contains 8 terminations.For operation, we use the 8 pins.It is important to note that the LED driving board has 1 functions.In terms of output, the lighting driver can provide a maximum of 2A V.The supply voltage can be 3.3V for high efficiency.The LED driving board is equipped with a total of 8 pins.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.There is a voltage supply of 3/5V volts on this part.There is a maximum input voltage of 5.5V volts.As a minimum input voltage, it requires 2.7V volts.
TPS2034P Features
Supplied from 3.3V
TPS2034P Applications
There are a lot of Texas Instruments TPS2034P Power Switches ICs applications.
- Portable/Handheld Devices
- Hard Disk Drives
- Solid State Drivers
- USB Protection
- Low Voltage I/O System Power
- Notebook PC
- Wireless Modem Data Cards
- PC Cards
- Storage Drives
- HDD and SSD