TPS2034DG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2034 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Current - Output (Max) | 2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 3A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2034DG4 Overview
As you can see, it's packaged in the way of a Tube.This file is included in package 8-SOIC (0.154, 3.90mm Width).A Surface Mount mounting is used for the LED driving board.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.The LED driver has 1 outputs.A supply voltage of Not Required is required for it to operate.The maximum output voltage is N-Channel volts.In terms of features, the LED driving board has Status Flag.This object belongs to the TPS2034 family.It contains 8 terminations.The 8 pins are used for the operation of the system.As far as the lighting driver is concerned, there are 1 functions.From the lighting driver, there is a maximum output of 2AV.High efficiency is possible when the supply voltage is set to 3.3V.The LED driving board is equipped with a total of 8 pins.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In this case, the power supply is 3/5V.As far as input voltage goes, its maximum is 5.5V volts.The minimum input voltage is 2.7V volts.
TPS2034DG4 Features
Supplied from 3.3V
TPS2034DG4 Applications
There are a lot of Texas Instruments TPS2034DG4 Power Switches ICs applications.
- USB Power Distribution
- Low Voltage I/O System Power
- Handheld Devices
- Smartphone and PDA
- Portable GPS Device
- Portable/Handheld Devices
- Wireless Headsets
- Solid-State Drives
- PC Card Hot Swap
- Smart Phones, Feature Phones