TPS2034D
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 20 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 33mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2034 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 3A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2034D Overview
A Tube is used to package it.It's included in the 8-SOIC (0.154, 3.90mm Width) package.The LED driver is mounted as Surface Mount.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.The lighting driver has a total of 1 outputs that are available for use.The LED driving board is powered by a voltage of Not Required.Voltage output is N-Channel volts at maximum.There are Status Flag features available on the LED driving board.As you can see, it comes from the TPS2034 family.It contains 8 terminations.For operation, 8 pins are used.It has 1 functions.Maximum output current falls to 2A when operation criteria are met.It is possible to obtain high efficiency with a supply voltage of 3.3V.8 pins are equipped with it.33mOhm is the resistance of the lighting driver.In this case, the output current is set to 2A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This part has a power supply of 3/5V volts.Its maximum input voltage is 5.5V volts.There is a minimum input voltage of 2.7V volts.
TPS2034D Features
Supplied from 3.3V
Resistance of 33mOhm
TPS2034D Applications
There are a lot of Texas Instruments TPS2034D Power Switches ICs applications.
- Portable Devices
- Mobile Communication Devices
- Telecom and Network Systems
- Portable/Handheld Devices
- Portable GPS
- Low Voltage I/O System Power
- Portable Music Players
- Wireless Modem Data Cards
- USB3.1 Power Delivery
- Hot-Swap Systems