TPS2032P
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2032 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 μs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
TPS2032P Overview
As you can see, it's packaged in the way of a Tube.It is included in the package 8-DIP (0.300, 7.62mm).The lighting driver has the mounting type Through Hole.This switch is of type General Purpose.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It has a total of Status Flag features.It belongs to the TPS2032 family.There are 8 terminations in it.For operation, we use the 8 pins.The LED driving board has a total of 1 functions.Its maximum output voltage is 1AV.A supply voltage of 3.3V leads to high efficiency.Through Hole is mounted in the way of this LED driving board.It is equipped with a total of 8 pins.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.For normal operation, the supply voltage (Vsup) should be kept above 2.7V.It has a power supply of 3/5V.
TPS2032P Features
Supplied from 3.3V
TPS2032P Applications
There are a lot of Texas Instruments TPS2032P Power Switches ICs applications.
- Hot Swap
- Portable GPS
- Solid-State Drives
- Portable GPS Device
- USB3.1 Power Delivery
- Handheld Devices
- Smartphone and PDA
- Portable Music Players
- Gaming
- PDAs