TPS2030IDRQ1
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2030 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Current - Output (Max) | 200mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.3A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
TPS2030IDRQ1 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This file is included in package 8-SOIC (0.154, 3.90mm Width).A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.The LED driver has a total of 1 outputs.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.It comes under the family of TPS2030.It has a total of 8 terminations.The 8 pins are used to operate the LED driver.It contains 1 functions.This lighting driver is capable of delivering a maximum output of 200mA volts.Using a voltage of 3.3V allows for high efficiency.As a result, it has a total of 8 pins.These electrical components are part of the Automotive, AEC-Q100 series.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In this case, the power supply is 3/5V.Voltage input is limited to 5.5V volts.The input voltage minimum is 2.7V volts.
TPS2030IDRQ1 Features
Supplied from 3.3V
TPS2030IDRQ1 Applications
There are a lot of Texas Instruments TPS2030IDRQ1 Power Switches ICs applications.
- Wireless/Networking Cards
- Low Voltage I/O System Power
- PDAs
- Hot-Swap Systems
- Hot Swaps
- PC Cards
- Portable/Handheld Devices
- USB3.1 Power Delivery
- Solid State Drivers
- Handheld Devices