TPS2030DRG4
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2030 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Current - Output (Max) | 200mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.3A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
TPS2030DRG4 Overview
The package is in the form of a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package contains it.This lighting drivere has a mounting type of Surface Mount.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The LED driver is equipped with 1 outputs.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts on this LED driver.Currently, the LED driving board is equipped with Status Flag features.The TPS2030 family consists of this type.A total of 8 terminations can be found in it.It is necessary to use the 8 pins in order to operate the LED driver.It contains 1 functions.The LED driver output is limited to 200mAV.Using a voltage of 3.3V allows for high efficiency.8 pins are equipped with it.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.In this case, the power supply is 3/5V.Its maximum input voltage is 5.5V volts.The input voltage minimum is 2.7V volts.
TPS2030DRG4 Features
Supplied from 3.3V
TPS2030DRG4 Applications
There are a lot of Texas Instruments TPS2030DRG4 Power Switches ICs applications.
- Hot-Swap Systems
- Portable/Handheld Devices
- Handheld Devices
- USB3.1 Power Delivery
- Portable GPS
- USB Power Distribution
- HDD and SSD
- USB Ports/Hubs
- PC Cards
- USB Power Distribution