TPS2023D
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 33mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2023 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 2.2A |
| Rds On (Typ) | 33m Ω |
| Drain to Source Resistance | 33mOhm |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2023D Overview
The LED driver's packaged as a Tube.This package is included in 8-SOIC (0.154, 3.90mm Width).It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.By default, it is set to output 1.Operation is based on Not Required supply voltage.The maximum output voltage is N-Channel volts.There are Status Flag features available on the LED driving board.The TPS2023 family contains this object.It consists of 8 terminations in total.8 pins are used for operation.Currently, the lighting driver has a total of 1 functions.As long as the supply voltage is 3.3V, high efficiency can be achieved.The LED driving board is equipped with a total of 8 pins.The LED driver has 33mOhm resistance.In this case, the output current is set to 1.5A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In this part, the power supply is set to 3/5V.Voltage input is limited to 5.5V volts.It has a 2.7V volt minimum input voltage.
TPS2023D Features
Supplied from 3.3V
Resistance of 33mOhm
TPS2023D Applications
There are a lot of Texas Instruments TPS2023D Power Switches ICs applications.
- Wearable Devices
- Portable Devices
- USB Protection
- Solid-State Drives
- Various applications equipped with buttons
- Storage (HDDs, SSDs)
- Set-top-box
- Gaming
- Storage Drives
- HDD and SSD