TPS2022P
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
TPS2022P Overview
The package is in the form of a Tube.There is a 8-DIP (0.300, 7.62mm) package that includes it.The lighting driver has the mounting type Through Hole.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The lighting driver is equipped with 1 outputs that can be used.The LED driving board operates at Not Required volts.It produces a maximum output voltage of N-Channel volts at its maximum output.A lighting driver with Status Flag features is available.A total of 8 terminations can be found in it.There are 1 functions of the LED driver.This lighting driver is capable of delivering a maximum output of 1A volts.The supply voltage of 3.3V is conducive to high efficiency.In total, it has 8 pins.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.
TPS2022P Features
Supplied from 3.3V
TPS2022P Applications
There are a lot of Rochester Electronics, LLC TPS2022P Power Switches ICs applications.
- Hot Swap
- Handheld Devices
- Storage Drives
- Wireless Modem Data Cards
- Solid-State Drives
- Hot Swaps
- Notebook PC
- Wearable Devices
- Mobile Communication Devices
- USB Ports/Hubs