TPS2022DRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2022 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2022DRQ1 Overview
It is packaged in the form of a Tape & Reel (TR).It is included in the package 8-SOIC (0.154, 3.90mm Width).It has been mounted as Surface Mount on the LED driver.There is a General Purpose switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.The maximum output voltage is N-Channel volts.Currently, the LED driving board is equipped with Status Flag features.There is a TPS2022 family of things that it belongs to.A total of 8 terminations can be found in it.It is necessary to use the 8 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.It is necessary to reduce the maximum output current to 1A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 3.3V.In total, it has 8 pins.This electrical component can be found in the Automotive, AEC-Q100 series.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.It has a power supply of 3/5V.Its maximum input voltage is 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.
TPS2022DRQ1 Features
Supplied from 3.3V
TPS2022DRQ1 Applications
There are a lot of Texas Instruments TPS2022DRQ1 Power Switches ICs applications.
- PC Cards
- Wireless Modem Data Cards
- Storage (HDDs, SSDs)
- Hot Swaps
- Smartphone and PDA
- Storage Drives
- USB Power Distribution
- Set-top-box
- Wireless/Networking Cards
- USB3.1 Power Delivery