TPS2020P
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2020 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Current - Output (Max) | 200mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.3A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2020P Overview
It's?packaged?in?the way?of?a?Tube.There is a package for it in the 8-DIP (0.300, 7.62mm) package.The lighting driver has the mounting type Through Hole.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.It is possible to use 1 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.There is a TPS2020 family of things that it belongs to.There are 8 terminations in it.During operation, the 8 pins are used.As far as the lighting driver is concerned, there are 1 functions.200mAV is the maximum output of the LED driver.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.As a result, it is mounted in the manner of Through Hole.8 pins are connected to it in total.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.Normal operation requires Vsup above 2.7V.In this case, the power supply is 3/5V.
TPS2020P Features
Supplied from 3.3V
TPS2020P Applications
There are a lot of Texas Instruments TPS2020P Power Switches ICs applications.
- Portable Video Game Players
- Portable/Handheld Devices
- Portable GPS Device
- Notebook PC
- Solid-State Drives
- USB3.1 Power Delivery
- Hot Swap
- Portable GPS
- Storage Drives
- Solid State Drivers