TPS2000CDGK
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2000 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Current - Output (Max) | 2A |
| Nominal Supply Current | 85μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 69m Ω |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
TPS2000CDGK Overview
It is package in Tube case.This package is included in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).The lighting driver is mounted in the Surface Mount position.A USB Switch switch type is owned by it.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts on this LED driver.A lighting driver with Status Flag features is available.The TPS2000 family consists of this type.It contains 8 terminations.The 8 pins are used to operate the LED driver.It is important to note that the LED driving board has 1 functions.In terms of output, the lighting driver can provide a maximum of 2A V.As long as the supply voltage is 5V, high efficiency can be achieved.The LED driving board is equipped with a total of 8 pins.In this LED driving board, the analog IC ANALOG CIRCUIT is employed.You can select from 1 channels.It has a maximum input voltage of 5.5V volts.It requires 4.5V volts as the minimum input voltage.
TPS2000CDGK Features
Supplied from 5V
1 channels
TPS2000CDGK Applications
There are a lot of Texas Instruments TPS2000CDGK Power Switches ICs applications.
- Solid State Drivers
- Various applications equipped with buttons
- Gaming
- Wireless Modem Data Cards
- Mobile Communication Devices
- Hot-Swap Systems
- Storage Drives
- Notebook and Tablet Computers
- USB Ports/Hubs
- Hot Swaps