TPS1HA08BQPWPRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS1HA08 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Current - Output (Max) | 80A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~18V |
| Fault Protection | Current Limiting (Adjustable), Open Load Detect, Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 80A |
| Rds On (Typ) | 9m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
TPS1HA08BQPWPRQ1 Overview
A Tape & Reel (TR) is used to package it.This package is included in 16-PowerTSSOP (0.173, 4.40mm Width).The mounting type of the LED driver is Surface Mount.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TA.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.The maximum output voltage is N-Channel volts.There are Slew Rate Controlled features available on the LED driving board.It is part of the TPS1HA08 family of LED drivers.It contains 16 terminations.The LED driver has 1 functions.There is a maximum output of 80AV from the LED driver.It is possible to achieve a high level of efficiency with a supply voltage of 13.5V.This electrical component can be found in the Automotive, AEC-Q100 series.Normal operation requires a voltage above 8V for the supply voltage.
TPS1HA08BQPWPRQ1 Features
Supplied from 13.5V
TPS1HA08BQPWPRQ1 Applications
There are a lot of Texas Instruments TPS1HA08BQPWPRQ1 Power Switches ICs applications.
- Portable GPS Device
- Low Voltage I/O System Power
- Storage (HDDs, SSDs)
- Hot Swaps
- Smartphone and PDA
- Various applications equipped with buttons
- USB Power Distribution
- Portable Devices
- Solid State Drivers
- PC Card Hot Swap