TPIC6B595DW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 513.211417mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | TPIC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | TPIC6B595 |
| Function | Serial to Parallel, Serial |
| Output Voltage | 50V |
| Output Type | Open Drain |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 20μA |
| Power Dissipation | 1.39W |
| Propagation Delay | 200 ns |
| Turn On Delay Time | 200 ns |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | STANDARD |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Number of Bits per Element | 8 |
| Interface IC Type | REGISTER BASED PERIPHERAL DRIVER |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Output Peak Current Limit-Nom | 0.5A |
| Built-in Protections | TRANSIENT |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPIC6B595DW Overview
This device can be found embedded within the package 20-SOIC (0.295, 7.50mm Width). 20 is the number of terminations on the chip. The Tube case contains it. Voltage rating of the part is 5V. The device is equipped with 20 pins. Surface Mount is recommended for mounting. Surface Mount is the way this component is mounted. A temperature range of -40°C~125°C is used for operation. The voltage supplied to it is within the range of 4.5V~5.5V. TPIC is the series number of this electrical component. If you use the TPIC6B595 family, you can find parts that are similar. It is noted that this chip uses an operating supply voltage of 5V. A device with 1 input lines is available. It is necessary to operate 9 output lines of the system.
TPIC6B595DW Features
With 20 pins
Mounted in Surface Mount type.
Based on TPIC6B595 family
Operate supply voltage at 5V
With 9 output lines
TPIC6B595DW Applications
There are a lot of Texas Instruments TPIC6B595DW Shift Registers applications.
- Data Processors
- Generate time delay toward digital circuits
- Flash Memory
- Remote control holding register
- Dual-rank shift, hold, and bus applications
- Remote control holding register
- Counter
- Parallel to serial converter
- data manipulation
- Data Format Converters