TPIC6596DWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 537.308512mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | TPIC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | TPIC6596 |
| Function | Serial to Parallel, Serial |
| Output Type | Open Drain |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Propagation Delay | 650 ns |
| Turn On Delay Time | 650 ns |
| Logic Function | Shift Register |
| Output Current-Max | 0.5A |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Number of Bits per Element | 8 |
| Interface IC Type | SIPO BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 8 |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Output Peak Current Limit-Nom | 1.5A |
| Built-in Protections | TRANSIENT |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPIC6596DWRG4 Overview
This device can be found embedded within the package 20-SOIC (0.295, 7.50mm Width). 20 is the sum of the number of terminations in the chip. It is packed in a case number Tape & Reel (TR). This part has an operating supply voltage of 5V. It is equipped with a pin count of 20. Mounting by Surface Mount is recommended. This component is mounted in the way of Surface Mount. A temperature range of -40°C~125°C is used for the operating environment. Votage is supplied within 4.5V~5.5V. Similar parts can be found using the TPIC family. Similar parts can be found by searching for the TPIC6596 family. It is noted that the operating supply voltage of this chip falls within the range 5V. A device with 1 input lines is available. There is a capability to deliver voltage at 5V. Operating on 9 output lines is possible. It belongs to the subcategory of Peripheral Drivers.
TPIC6596DWRG4 Features
With 20 pins
Mounted in Surface Mount type.
Based on TPIC6596 family
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
TPIC6596DWRG4 Applications
There are a lot of Texas Instruments TPIC6596DWRG4 Shift Registers applications.
- LED matrix control
- ROM Chips
- Delay Line
- Data Format Converters
- Counter
- Data Processors
- data manipulation
- Serial-to-parallel data conversion
- Parallel data
- Remote control holding register