TPIC6595DWG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 537.308512mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | TPIC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | TPIC6595 |
| Function | Serial to Parallel, Serial |
| Output Type | Open Drain |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Propagation Delay | 650 ns |
| Turn On Delay Time | 650 ns |
| Logic Function | Latch, Shift Register |
| Output Current-Max | 0.5A |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Number of Bits per Element | 8 |
| Interface IC Type | SIPO BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 8 |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Output Peak Current Limit-Nom | 2A |
| Built-in Protections | TRANSIENT |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPIC6595DWG4 Overview
This device can be found embedded within the package 20-SOIC (0.295, 7.50mm Width). This chip has a total termination count of 20. Presented in a case of Tube. This part has an operating supply voltage of 5V. 20 pins are provided on the device. It is recommended that the mount should be done by Surface Mount. As you can see, this component is mounted in the way of Surface Mount. Operating temperatures are within the range of -40°C~125°C. It is supplied with voltage within 4.5V~5.5V. This electrical component belongs to the TPIC series. If you use the TPIC6595 family, you can find parts that are similar. It is noted that the operating supply voltage of this chip falls within the range 5V. This device has 1 input lines available. Voltage can be delivered at 5V. Operation is available on only 9 output lines. This subcategory falls under the Peripheral Drivers category.
TPIC6595DWG4 Features
With 20 pins
Mounted in Surface Mount type.
Based on TPIC6595 family
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
TPIC6595DWG4 Applications
There are a lot of Texas Instruments TPIC6595DWG4 Shift Registers applications.
- Data manipulation
- 8-bit data storage
- Delay Line
- data transfer
- Sequence generator
- Data Format Converters
- Output expansion
- temporary data storage
- Remote control holding register
- Generate time delay toward digital circuits