TPIC6595DW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 513.211417mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | TPIC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | TPIC6595 |
| Function | Serial to Parallel, Serial |
| Output Voltage | 45V |
| Output Type | Open Drain |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 15μA |
| Power Dissipation | 225mW |
| Propagation Delay | 650 ns |
| Turn On Delay Time | 650 ns |
| Logic Function | Shift Register |
| Output Current-Max | 0.5A |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Bits per Element | 8 |
| Interface IC Type | SIPO BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 8 |
| Number of Input Lines | 1 |
| Turn On Time | 0.625 µs |
| Input Current | 1μA |
| Number of Output Lines | 9 |
| Output Peak Current Limit-Nom | 2A |
| Built-in Protections | TRANSIENT |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPIC6595DW Overview
This device can be found embedded within the package 20-SOIC (0.295, 7.50mm Width). 20 is the number of terminations on the chip. It is packed in a case number Tube. 5V is the part's operating supply voltage. 20 pins are located on the device. It is recommended that the mount should be done by Surface Mount. This component is mounted in the way of Surface Mount. The operating temperature ranges -40°C~125°C. Votage is provided within 4.5V~5.5V. The TPIC series contains this electrical component. A TPIC6595 family can be used to search for similar parts. In terms of supply voltage, this chip operates within the range of 5V. In the device, there are 1 input lines. A device capable of delivering voltage at 5V can be used. Operation is available on only 9 output lines. The subcategory of this item is Peripheral Drivers.
TPIC6595DW Features
With 20 pins
Mounted in Surface Mount type.
Based on TPIC6595 family
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
TPIC6595DW Applications
There are a lot of Texas Instruments TPIC6595DW Shift Registers applications.
- Output expansion
- Data Processors
- Remote control holding register
- Data manipulation
- Parallel to serial converter
- Dual-rank shift, hold, and bus applications
- data manipulation
- Generate time delay toward digital circuits
- Pulse Extenders
- Serial to parallel converter