TP3067N/NOPB
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -25°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | PCM, Filter |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TP3067 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Data Interface | Serial |
| Voltage - Supply, Analog | ±5V |
| Number of A/D Converters | 1 |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 8 b |
| Sigma Delta | No |
| Number of ADCs / DACs | 1 / 1 |
| Filter | YES |
| Companding Law | A-LAW |
| Neg Supply Voltage-Nom | -5V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TP3067N/NOPB Overview
As a space saver, it comes in the 20-DIP (0.300, 7.62mm) package. Tube is the packaging method used. Due to the fact that this part is of the type PCM, Filter, it is capable of delivering high-efficiency performance in a wide range of applications. The mounting type of this device is Through Hole. A -25°C~125°C operating performance setting allows it to operate normally. Integrated ADCs / DACs are available in 1 / 1. Supply voltage ±5V is provided to the analog circuit. In order to prevent signal reflections from off the end of the transmission line, 20 terminations are used. The device has a 20-pin configuration. There are 20 pins on it. Using its base part number TP3067, it can be used to locate parts that are related. Mounted on a PCB based on the technology of Through Hole. Supply voltage should never exceed 5.25V. Digital signals are converted from analog signals using 1 A/D converters. Subcategory Codecs applies to this electronic part. Maintaining a minimum voltage of 4.75V is recommended. In order to operate, it must be supplied with a voltage of 5V. It can be operated from a voltage of 5V. Digital signals are converted into analog signals using 2 D/A converters. Information is stored with 8 bits. There are -5V supply voltages that have a more negative polarity than the ground.
TP3067N/NOPB Features
Embedded in the 20-DIP (0.300, 7.62mm) package
Operating temperature of -25°C~125°C
1 / 1 ADCs / DACs
1 A/D converters
TP3067N/NOPB Applications
There are a lot of Texas Instruments TP3067N/NOPB CODECs Interface ICs applications.
- Digital systems
- Galvanometer scanners
- RF-based home automation system
- Full adders
- Addition
- Packaging
- Metal forming & fabrication
- Cut-to-length
- Automated Guided Vehicles (AGV)
- Textile manufacturing