TNY279PG
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2009 |
| Series | TinySwitch®-III |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power (Watts) | 32W |
| Power Rating | 25W |
| Max Power Dissipation | 32W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 510μA |
| Output Current | 1A |
| Output Power | 25W |
| Control Features | EN |
| Topology | Flyback |
| Frequency - Switching | 132kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 65 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
TNY279PG Overview
8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.There is a AC/DC power converter of Tube available.Through Hole is mounted in the way of this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.At this point, the switching frequency reaches 132kHz .As a result, it has had 7 terminations.Up to 8 pins are present on the ac-dc converter.A member of the TinySwitch?-III manufacturer family, it has the following characteristics.There are 1 outputs to run.It has been set to 1A for the output current.The output voltage of the AC/DC converter is 12V .The output power of a coverter is assumed to be 25W .This converter requires a minimum supply voltage of 85V volts.265V is the maximum supply voltage across the converter.
TNY279PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 132kHz
Output Current at 1A
TNY279PG Applications
There are a lot of Power Integrations TNY279PG AC DC Converters applications.
- Utility meters
- Low power ac?dc Adapters for Chargers
- Power adapters for monitors
- PDAs
- MP3
- AC/DC LED Driver applications
- AC/DC Adaptors/Chargers for PDAs
- Digital cameras
- Charger
- AC?DC USB chargers for Cameras