TNY267GN-TL
| Parameters | |
|---|---|
| Factory Lead Time | 11 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | TinySwitch®-II |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8/7 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 315μA |
| Output Current | 500mA |
| Output Power | 12W |
| Control Features | EN |
| Topology | Flyback |
| Frequency - Switching | 132kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 68 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 65% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 3.98mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY267GN-TL Overview
There is a ac to dc converter embedded in package 8-SMD (7 Leads), Gull Wing .The AC/DC power converter type is Tape & Reel (TR) .There is a mounting point for this AC/DC converter in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.As a result, the switching frequency reaches 132kHz .In total, it has 7 terminations.In this ac/dc converter, there are 7 pins.There are 8/7 pins on the ac-dc converter.It are possible to mount thare ac dc converters by Surface Mount .It is a member of TinySwitch?-II manufacturer family.Running 1 outputs is available.In this AC to DC transformer, the output current is set to 500mA .There is 5V output voltage from this AC/DC converter.12W is the output power of a coverter.The minimum supply voltage across the converter is 85V .There is a maximum supply voltage of 265V across the converter.
TNY267GN-TL Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 132kHz
With 7 pins
Output Current at 500mA
TNY267GN-TL Applications
There are a lot of Power Integrations TNY267GN-TL AC DC Converters applications.
- AC--DC Adapter
- IoT Applications
- Battery chargers for cordless
- Power adapters for network devices
- Standby power supplies for VCR
- LED Driver
- Charger
- Auxiliary Power Supply
- Off--line Battery Charger
- Adapter for ADSL