TNY265GN-TL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | TinySwitch®-II |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 11W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8/7 |
| JESD-30 Code | R-PDSO-G7 |
| Output Voltage | 5.8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 245μA |
| Control Features | EN |
| Topology | Flyback |
| Output Current-Max | 0.44A |
| Frequency - Switching | 132kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 68 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 65% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY265GN-TL Overview
In the 8-SMD (7 Leads), Gull Wing package, the ac to dc converter is embedded.The ac dc converter is available in Tape & Reel (TR) case.There is a mounting point for this AC/DC converter in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.As a result, the switching frequency reaches 132kHz .There have been 7 terminations of this program.In this ac/dc converter, there are 8 pins.There are 8/7 pins in the ac-dc converter.Currently, it is acdc converter of the manufacturer family of TinySwitch?-II .The output voltage of the AC/DC converter is 5.8V .Ac to dc inverters can be supplied with a maximum current of 0.44A .The minimum supply voltage across the converter is 85V .265V is the maximum supply voltage across the converter.
TNY265GN-TL Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 132kHz
With 8 pins
TNY265GN-TL Applications
There are a lot of Power Integrations TNY265GN-TL AC DC Converters applications.
- DVD players
- Battery Chargers
- Adapter/Charger for Cell
- Standby Power Supplies
- Power adapters for monitors
- White goods
- Battery chargers for mobile devices with touchpad display
- Standby Power for General Off-Line Applications
- AC/DC Adaptors/Chargers for Cell Phones
- Appliance Power Supplies