TNY265GN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | TinySwitch®-II |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 11W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8/7 |
| JESD-30 Code | R-PDSO-G7 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | Adjustable |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 245μA |
| Output Current | 295mA |
| Output Power | 7.5W |
| Control Features | EN |
| Topology | Flyback |
| Frequency - Switching | 132kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 68 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 65% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY265GN Overview
In the package 8-SMD (7 Leads), Gull Wing , the ac to dc converter is embedded.It is available in Tube AC/DC power converter.In this case, the AC/DC converter is mounted in the way of Surface Mount .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .This AC DC converter employs SWITCHING REGULATOR analog IC type.When the switching frequency reaches 132kHz , the circuit is closed.It has a total of 7 terminations.The ac/dc converter has a total of 8 pins.The pins of the ac-dc converter count up to 8/7 .The ac dc converters are suitable for mounting by Surface Mount .This AC to DC converter belongs to the TinySwitch?-II manufacturer family.A total of 1 outputs are to be processed.We have set the output current to 295mA .There is 5.8V voltage output from it.Coverters generate 7.5W as their output power.This converter requires a minimum supply voltage of 85V volts.There is a maximum supply voltage of 265V across the converter.It uses Adjustable as an output.
TNY265GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 132kHz
With 8 pins
Output Current at 295mA
Output Type : Adjustable
TNY265GN Applications
There are a lot of Power Integrations TNY265GN AC DC Converters applications.
- Humidifier
- Standby power supplies for IR
- Appliances
- AC?DC USB chargers for Tablets
- Lighting controls
- IoT Applications
- Off--line Battery Charger
- Charger
- Networking
- Standby power