TNY253GN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| Series | TinySwitch® |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | PURE MATTE TIN |
| Max Power Dissipation | 2W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 140μA |
| Output Current | 165mA |
| Output Power | 2W |
| Control Features | EN |
| Topology | Flyback |
| Frequency - Switching | 44kHz |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 68 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 3.73mm |
| Length | 9.59mm |
| Width | 6.35mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY253GN Overview
An embedded ac to dc converter is included in 8-SMD, Gull Wing package.In Tube case, the ac dc converter is available.As you can see, this AC/DC converter is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.44kHz is the switching frequency.Total terminations are 8 .The ac/dc converter has a total of 8 pins.A total of 8 pins are present on the ac-dc converter.It are possible to mount thare ac dc converters by Surface Mount .This AC to DC converter belongs to the TinySwitch? manufacturer family.The number of outputs to run is 1 .There is 165mA output current set.Its output voltage is5.8V .The output power of a coverter generates 2W .There should be no less than 85V voltage across the converter.265V is the maximum supply voltage across the converter.
TNY253GN Features
Packaged with 8-SMD, Gull Wing
Switching Frequency at 44kHz
With 8 pins
Output Current at 165mA
TNY253GN Applications
There are a lot of Power Integrations TNY253GN AC DC Converters applications.
- Auxiliary Power Supplies
- Lighting controls
- Switching AC-DC Charger
- Home appliances
- IoT Applications
- Linear Adapter Replacements
- Laptops and personal digital assistants
- Consumer electronics
- AC/DC Adaptors/Chargers for PDAs
- Power Adaptors