TMUX6113RTER
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Base Part Number | TMUX6113 |
| JESD-30 Code | S-PQCC-N16 |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 10V~16.5V ±5V~16.5V |
| Bandwidth | 380MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| -3db Bandwidth | 800MHz |
| On-State Resistance (Max) | 160Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 20pA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 2.4pF |
| On-state Resistance Match-Nom | 2.5Ohm |
| Switch Circuit | SPST |
| Switch Time (Ton, Toff) (Max) | 78ns, 68ns |
| Charge Injection | 0.6pC |
| Channel-to-Channel Matching (ΔRon) | 2.5 Ω |
| Crosstalk | -100dB ~ -115dB @ 1MHz |
| Switch-on Time-Max | 117ns |
| Switch-off Time-Max | 81ns |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| RoHS Status | RoHS Compliant |
TMUX6113RTER Overview
Shipping overseas is convenient with the electronic component packed in 16-WFQFN Exposed Pad. High reliability is achieved by using advanced packaging method Cut Tape (CT). This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operational temperature extended around -40°C~125°C TA. In total, there have been 16 terminations. A 1 channel electronic part produces high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. A SPST switching circuit is used for these analog switches. There are 4 circuits in this multiplexer. Search with TMUX6113 if you are looking for analog multiplexer variants. The data can be transferred over a wide range of bandwidths, called 380MHz bandwidths.
TMUX6113RTER Features
1 Channels
Switch Circuit: SPST
-3db Bandwidth: 800MHz
Bandwidth: 380MHz
TMUX6113RTER Applications
There are a lot of Texas Instruments TMUX6113RTER Analog Switches & Multiplexers ICs applications.
- Data switching
- Fiber In The Loop (FITL)
- Industrial and process control systems
- Cable PC
- Sample hold systems
- Battery Powered Instruments
- Microwave transmission systems
- Automatic test equipment
- Communications systems
- E1 Network Equipment