TMUX1113PWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TMUX1113 |
| JESD-30 Code | R-PDSO-G16 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Bandwidth | 400MHz |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 4Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 80pA |
| Channel Capacitance (CS(off), CD(off)) | 7pF 10pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Circuit | SPST |
| Charge Injection | -1.5pC |
| Channel-to-Channel Matching (ΔRon) | 130m Ω |
| Crosstalk | -90dB @ 10MHz |
| Switch-on Time-Max | 190ns |
| Switch-off Time-Max | 190ns |
| Voltage - Supply, Single (V+) | 1.08V~5.5V |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
TMUX1113PWR Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Multiplexer and demultiplexer circuits have a number 1:1. Around -40°C~125°C TA is the extended operating temperature. Total terminations are 16. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 1.2V is used, the electronic component should be turned on and run. SPST switching circuits are used in these analog switch ics. There are 4 circuits in this multiplexer. Try searching with TMUX1113 to find analog multiplexer variants. Analogue multiplexers require a 1.08V~5.5V voltage to drain from a single voltage supply. The data can be transferred over a wide range of bandwidths, called 400MHz bandwidths.
TMUX1113PWR Features
1 Channels
Switch Circuit: SPST
-3db Bandwidth: 300MHz
Bandwidth: 400MHz
TMUX1113PWR Applications
There are a lot of Texas Instruments TMUX1113PWR Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- Fiber to the Home
- Private Branch Exchange (PBX)
- Mechanical reed relay replacement
- Residential Gateways, Home Gateway/Router
- Communications systems
- Medical
- USB 1.1 signal switching circuits
- SONET
- Central office