TLV3202AIDGKR
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV3202 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 50μA |
| Max Supply Current | 40μA |
| Propagation Delay | 50 ns |
| Quiescent Current | 50μA |
| Response Time | 47 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 50pA |
| Input Bias Current | 50pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 50pA @ 5V |
| Hysteresis | 1.2mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 85dB PSRR |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3202AIDGKR Overview
In order to facilitate transportation, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .A comparator with a Push-Pull output is used here.The part will be shipped by Tape & Reel (TR) .8 terminals are found on the comparator.The electrical component in this case belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Speaking of types, this is a typical General Purpose comparator.Currently, it consists of only 2 elements.The device includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .The comparator is equipped with 8 pins.Try search TLV3202 to get more pin-to-pin solutions for your special needs.A quiescent current of 50μA is observed in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 50μA .A current supply greater than 40μA may cause the comparator to malfunction.3/5V power supplies are enough to run the device.Electronic comparator is possible to input a maximum current of 50pA into the device.Packed in TR , this device is for general uses (often in ADC circuits).
TLV3202AIDGKR Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 50μA
TLV3202AIDGKR Applications
There are a lot of Texas Instruments TLV3202AIDGKR linear comparators applications.
- Zero-Crossing Detectors
- Security Detection Systems
- Pulse, Squarewave, and Time Delay Generators
- Motor drives
- Lithium ion battery monitoring
- Mobile Phones and Tablets
- Handheld Instruments
- System control and monitoring
- Consumer Medical Electronics
- Wireless Base Stations