TLV2401IDBVT
| Parameters | |
|---|---|
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 390μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0003μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 5.5 kHz |
| Max I/O Voltage | 1.2mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 385mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV2401 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Number of Channels | 1 |
| Operating Supply Current | 900nA |
| Nominal Supply Current | 990nA |
| Power Dissipation | 385mW |
| Output Current | 200μA |
| Slew Rate | 0.0025V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 63 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Output Current per Channel | 200μA |
| Input Offset Voltage (Vos) | 1.2mV |
| Bandwidth | 5.5 kHz |
| Unity Gain BW-Nom | 5.5 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0009μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
TLV2401IDBVT Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case. This is a General Purpose type op amp. Linear amplifier is delivered in a Cut Tape (CT) case. There is a growing number of terminations approaching the number of 5. Buffer amplifier has a total of 5 pins on it. It is important to remember that this op amp should be operated at a voltage of 2.7V volts. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 5 pins. Regarding input offset voltage, op amp rates 1.2mV. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. An 900nA volt supply current is needed for this linear amplifier to operate. It is recommended to keep the voltage gain at 120dB at all times. 1 channels are available on the instrumentation amplifier. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 8V. The linear amplifier is packaged by using a TR axis.
TLV2401IDBVT Features
5 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2401IDBVT Applications
There are a lot of Texas Instruments TLV2401IDBVT Instrumentational OP Amps applications.
- Comparator
- Communication
- Car stereo
- Active probe
- Power transmission
- High input resistance broadband
- MP3
- Broadcasting
- Signal filtering
- Displayers for aircraft and air transportation control systems