TLV2304IDG4
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Pin Count | 14 |
| Number of Elements | 4 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.5V |
| Power Dissipation-Max | 1.022W |
| Nominal Supply Current | 1.7μA |
| Power Dissipation | 1.022W |
| Max Supply Current | 1.7μA |
| Current - Output | 200mA |
| Response Time | 55 μs |
| Slew Rate | 2500 V/us |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 500pA |
| Output Current per Channel | 200μA |
| Input Offset Voltage (Vos) | 5mV |
| Unity Gain BW-Nom | 5.5 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.001μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 8V |
| Low-Bias | YES |
| Micropower | YES |
| Min Dual Supply Voltage | 1.25V |
| Bias Current-Max (IIB) @25C | 0.0005μA |
| Programmable Power | NO |
| Wideband | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.905mm |
TLV2304IDG4 Overview
To facilitate transportation, it comes packaged in SOIC .Electronic comparator is shipped by Rail/Tube .The comparator has a total of 14 terminals.Electronic comparator is a component of the Operational Amplifier family.The comparator is capable of achieving many demanding tasks when supplied with 2.7V voltage.This is a 4 element comparator.There are 14 pins on this board.The comparator consists of 14 pins.The PCB or other board has a Surface Mount for mounting.The nominal supply current of the device should be 1.7μA for normal use.If the current supply exceeds 1.7μA , the comparator could malfunction.The voltage gain of the part is indicated by 120dB in the voltage formula.In general, temperatures higher than 125°C are not recommended.Comparator electronics cannot be operated at a temperature lower than -40°C .There is a maximum voltage supply on the comparator of 16V .Comparator electronics is possible to supply this comparator wComparator electronicsh a voltage as low as 2.5V .The output quality of 2 channels is maintained by cooperating with each other.This comparator basically consists of a OPERATIONAL AMPLIFIER amplifier with very high gain.Comparator electronics has an output current rated at 200mA .
TLV2304IDG4 Features
Employing 4 elements
Voltage Gain: 120dB
OPERATIONAL AMPLIFIER amplifier
TLV2304IDG4 Applications
There are a lot of Texas Instruments TLV2304IDG4 linear comparators applications.
- Infotainment & cluster
- Lithium ion battery monitoring
- Zero-Crossing Detectors
- High-Speed Sampling Circuits
- Factory automation & control
- Wide Range VCO; MOS Clock Timers
- Wearable Devices
- Battery management and protection
- Industrial
- Window Comparators, Multivibrators